Making Raised Panel Doors The Easy Way
https://www.youtu be.com/watch?v=3qp4tmefIac
#raisedpaneldoor #cabinetdoors #bathroomcabinetdoors Constructing an expert quality raised panel door does not need a big financial investment. Follow Wes as he takes you detailed through this procedure. With making use of just router bits and a basic router table, you too can make excellent raised panel doors. Panel Size … 9 x 20 1/2 ” 5/8″ thick The panel is 1/4″ less (W x H) than the optimum size readily available to enable the area balls. Video Revealing Router Table Build: Amazon links to router bits utilized for this door https://amzn.to/3EzchDW https://amzn.to/2Z4NqHT
Related posts:
How to Make Wood Doors With Glass || Cabinet Doors DIY
Just How to Make Great Looking Kitchen Cabinet Doors
No rubbish framework as well as level panel cupboard doors
Y...
Exactly how to readjust cooking area cupboard doors that wil...
Develop Cabinets The Easy Way|Just How to Make Drawer Faces
...
DIY Cabinet doors with just a table saw!
Learn the steps to easy DIY shaker cabinet doors.
Exactly How to Make DIY Cabinet Doors
Have an appearance at ...
STRAIGHTFORWARD ONE TOOL CABINET DOORS - DIY Shaker Doors Pa...
INCREDIBLE DIY Kitchen Cabinet Makeover | Power of paint and new doors!
Exactly How To Make Simple Cabinet Doors
Just how to make Sh...
Kreg Kitchen Makeover Series Part 1: How To Create New Cabin...
Can you share the link for the bits please.
It is shown on the description of the video. Thanks for watching, Wes
Once your router table is set, take a 1/2 drill, and drill through the fence and tackle get two half inch metal pins and next time you need to use it your measurements will be set by just using the metal pins.
Table not tackle
Thank you Daniel…great tip! Wes
What’s the hard way? lol
what the wood size thickness?
The final thickness of the door is 13/16″ . Thanks for watching, Wes
Thanks 😊 👍
Welcome 😊
Space Balls!!!
Great Video. Just starting my first project of cabinet doors. This will be useful.
Glad it was helpful! Thanks for watching, Wes
boy, did I learn something; I,m wondering if you have produced a book on cabinets and cabinet doors; I would love to buy it-if you have such a book kindly reply to my email along with purchasing instructions; thank you, PATRICK.P
I like the way you did this. One question, how thick is the center panel?
I would guess 1/2” as there is about 1/4” on the back side of the panel and it’s flush with the door sides which are 3/4”.
Clearly explain 💯💡👍
I must let you know that I learned something good from you today I was about to buy me a router table but the cost of it is so much money but when I look at your table give me an idea so thanks again for helping me save some money
Great explanation! 🎉
Thank you for sharing your expertise!!!! I’m making my first set of raised panel doors. You video has brought up some ideas. Hopefully mine will be as easy as yours!!! Thanks again!!!
Good helpful tips…but not even a riving knife on the table saw?
I know this is red oak. Is this cabinet grade plywood or true oak lumber? Will plywood deliver a good finish as well?